How to Reconnect Your Symynelec Camera

1. Open the Symynelec app

  • If the previous connection is no longer active, this is normal.
  • If the connection is still active, delete the device to prepare for re-connection.

2.Tap "Add Device".In the "Add Manually" section, select your camera model.

3. Skip through the setup instructions until you reach the Wi-Fi connection step

4. Enter your new Wi-Fi information and generate a QR code.

5. Reset the camera

  • Press and hold the reset button (usually near the SD/TF card slot) until the camera beeps.

6.Scan the QR code

  • Hold your phone 4–6 inches away from the camera lens and let the camera scan the QR code.
  • Wait for the camera to beep, confirming the scan was successful.

7. Tap "I heard a prompt" in the app to start pairing
8. Wait for the pairing process to complete.

9.Once pairing is complete, your camera is reset and reconnected.

Important: Ensure your Wi-Fi network is stable and has a strong signal during this process.

Regresar al blog